800GPD Light Commercial RO System with Booster Pump

Domestic Reverse Osmosis Purification Systems

If you’re looking for a water filter that will provide outstanding drinking water for your home or small business, then the Reverse Osmosis (RO) Water Purification System is one of the most popular and best water filtration methods available and is one of the most complete under the counter system on the market. The Reverse Osmosis Water Purification System will most definitely become your most favorite kitchen appliance. No other solution offers the same healthy benefits like clean fresh water that you will get from your Reverse Osmosis Water System, you can be rest assured that your drinking water is clean, clear and healthy.

The system eliminates up to 99.8% of harmful contaminants in water such as bacteria, viruses, arsenic, radium, lead and chlorine thanks to the multi-stage filtration technology. In simple terms, Reverse Osmosis works as water is forced across a semi-permeable membrane, leaving contaminants behind that are flushed down the drain. The clean drinking water collects in a holding tank.

The Reverse Osmosis Membranes used in our systems offers you one of the highest contaminant removal rates, enabling the system to produce the cleanest and clearest water possible. With the mere press of a level, you can enjoy an endless supply of the most refreshing and cleanest water in the comfort of your own kitchen.

Typical Rejection Characteristics of Reverse Osmosis Membranes

Suitable Applications

The 800GPD Reverse Osmosis System is suitable for:

• Larger households with higher drinking water requirements.
• Domestic kitchens requiring faster purified water production.
• Offices and staff kitchens.
• Small hospitality or catering kitchens with intermittent drinking water demand.
• Other high demand, single point-of-use drinking water applications.

Important Feed Water Information

This system is designed primarily for treated municipal water.

Borehole, well, rainwater, river water or other untreated water sources must be tested by a SANAS accredited water laboratory before the system is selected or installed. Depending on the water analysis, additional pre-treatment may be required for Sediment, Hardness, Iron, Manganese, Microbiological contamination or other contaminants.

Hard water, elevated TDS, high sediment levels, excessive chlorine and other poor feed water conditions can reduce purified water production and shorten the service life of the filters, membrane, pump and UV components.

Important Usage Limitations

• This is a point-of-use drinking water purification system.
• It is not designed as a whole house or point-of-entry water purification system.
• It is not suitable for supplying the complete water demand of a property.
• It is not an industrial reverse osmosis system.
• The integrated diaphragm booster pump is not intended for uninterrupted continuous duty operation.
• The maximum 800GPD rating is a membrane production rating under standard test conditions and must not be interpreted as a recommended continuous daily operating duty.
• Using the system for continuous commercial production, water bottling or industrial applications may damage the pump and power adaptor and may void the applicable product warranty.
• Actual purified water production may be lower than the maximum rated capacity.

Reverse Osmosis Drinking Water Systems Are Easy To Maintain And Upkeep Costs Are Minimal.

Reverse Osmosis Membranes and Filters will need to be replaced every 6 months to 2 years depending on the type of filter, your feed water quality and water usage volume.

Replacement Filters for a basic 5 Stage Reverse Osmosis Unit

Stage 1 – 5 micron Sediment Filter (10Inch RO Sediment Filter) – Recommended Filter Change – Every 6 Months

The Sediment Filter removes visible particles such as rust, mud, dirt and any other floating particles from the water.

Stage 2 – Granular Activated Carbon Filter (10Inch RO GAC Filter) – Recommended Filter Change – Every 6 Months

The Granular Activated Carbon Filter will remove chlorine or organic molecules, which can cause bad taste and smells, that may be in the water.

Stage 3 – Carbon Block Filter (10Inch RO CTO Filter) – Recommended Filter Change – Every 6 Months

The Carbon Block filter is the next in line defense for any chlorine of organic molecules which might have got through from the 2nd stage. It also has a 5 micron filter ability to catch any carbon that might have broken off the 2nd stage.

Stage 4 – Reverse Osmosis Membrane (800GPD RO Membrane) – Recommended Filter Change – Every 2 Years

The Reverse Osmosis Membrane is the filter that removes and purifies the water from any impurities that is not visible to the human eye, such as pesticides, bacteria, herbicides, viruses, parasites and traced metals. The membrane is continually flushing to prevent blockage and a build-up of bacteria on the membrane which results in waste water.

Stage 5 – Taste and Odor Filter (10Inch RO Post Filter) – Recommended Filter Change – Every 12 Months

As you may have guessed, the Taste and Odor Filter removes any remaining molecules that may cause a bad taste or smell to the water.

Optional 6th and/or 7th Stage – Mineral Injector / Alkaline Filter / Bio-Ceramic Filter / UV Light

Filter and membrane replacement intervals cannot be guaranteed. Actual service life depends on the incoming water quality, total water consumption, operating pressure, water temperature and maintenance of the system.

Filters may require earlier replacement when there is a noticeable reduction in purified water flow, deterioration in taste or odor, an increase in purified water TDS.