Description
DGS Grades
DGS comes in different grades depending on the application:
- DGS Grade 1 – 0.30mm – 1.00mm.
- DGS Grade 2 – 0.80mm – 2.50mm.
Use 60% of DGS Grade 1 and 40% of DGS Grade 2.
15% less DGS compared to sand is required due to the difference in specific weight. Bulk bed density = 1’250 kg/m3.
To replace 200kg of sand, you will only need 170kg of DGS.
Top layer: DGS Grade 1 (grain size 0.3 to 1.0 mm) = 100 kg (60%).
Bottom layer: DGS Grade 2 (grain size 0.8 to 2.5 mm) = 70 kg (40%).
* For Borehole, Well Water, River Water and/or Dam Water it is always advised to get the water tested trough as SANAS accredited water lab in accordance with SANS241 minimum recommendation for human consumption, before purchasing any water filtration equipment.
* The information and recommendations in this publication are based on data we believe to be reliable. They are offered in good faith, but do not imply any warranty or performance guarantee, as conditions and methods of use of the products are beyond our control. As such, Osmotech (Pty) Ltd makes no express or implied warranties of any kind with respect to this product, including but not limited to any implied warranty of merchantability or fitness for a particular purpose.
* The filter media listed on this product page do not remove or kill bacteria. Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.






Reviews
There are no reviews yet